Perancangan dan Implementası Sımulator Kolımator Sebagaı Medıa Pembelajaran Topık Sınar-X

Agatha Mahardika Anugrayuning Jiwatami; Sukma Meganova Effendi; Nugroho Budi Wicaksono

doi:10.31540/sjpif.v4i2.1867

Agatha Mahardika Anugrayuning Jiwatami Teknologi Elektromedis, Universitas Sanata Dharma, Sleman, Yogyakarta, Indonesia
Sukma Meganova Effendi Mekatronika, Universitas Sanata Dharma, Sleman, Yogyakarta, Indonesia
Nugroho Budi Wicaksono Teknologi Elektromedis, Universitas Sanata Dharma, Sleman, Yogyakarta, Indonesia

DOI: https://doi.org/10.31540/sjpif.v4i2.1867

Abstract

A collimator simulator which is an accessory in radiology equipment, has been made. This simulator was created as a learning medium to complete students' understanding in studying x-rays as part of electromagnetic waves. The research is divided into two stages, namely the manufacture of simulators and implementation as teaching materials. The collimator simulator is equipped with blades that are used to limit the radiation field area. In this study, collimator lamps were used to see the area of the field. The simulator is equipped with a motor to open and close the radiation window. The results of the implementation to students stated that students agreed that the collimator simulator learning media helped students to better understand the material.

Keywords: learning media, collimator, radiation field area

References

Akhadi, M. (2014). Analisis unsur kelumit melalui pancaran sinar-x karakteristik. Buletin Alara, 8(1).

Azaman, N; Azmi, A. Saderi, K. A; Sayuti, S.; Rahim, S.; Ismail, M. P. Dan Ibrahim, A. M. (2011). Non-Destructive Testing on Component for Reactor Cooling System by Radiography and Liquid Penetrant Methods. Nuclear Technical Convention (NTC).

Dixon R. L.; Whitlow, C. T. (2011). The Physical Basic of Diagnostik Imaging. In M. Y. M. Chen (Ed.), The Physical Basic of Diagnostik Imaging. Mc Graw Hill Companies, Inc.

Igwebike-Ossi, C. D. (2017). X-Ray Techniques. Failure Analysis and Prevention. https://doi.org/10.5772/intechopen.72447

Indrato, T. B.; Yulianto, E. Y.; Mak’ruf, M. R. (2020). Peralatan Radiologi Dasar (I). Kementerian Kesehatan Republik Indonesia.

Lopez, A., Bacelar, R., Pires, I., Santos, T. G., Sousa, J. P., & Quintino, L. (2018). Non-destructive testing application of radiography and ultrasound for wire and arc additive manufacturing. Additive Manufacturing, 21(March), 298–306. https://doi.org/10.1016/j.addma.2018.03.020

Mcclelland, I. R. (2004). X-ray equipment maintenance and repairs workbook for radiographers & radiological technologists. X-Ray Equipment Maintenance and Repairs for By, 262–272. http://apps.who.int/iris/bitstream/10665/42952/1/9241591633.pdf

Purwanto, N. (2013). Prinsip-prinsip dan Teknik Evaluasi Pengajaran. PT Remaja Rosdakarya.

Sugiyono. (2017). Metode Penelitian & Pengembangan Research and Development. Alfabeta.

Unett, E. M. dan Royle, A. J. (1997). Radiographic Techniques and Image Evaluation. Springer-Science Business Media, B.V.

Wardhani, R. pramita. (2019). Radiographic Examination Procedure As Non Destructive Testing Method in Process Piping. Mecha Jurnal Teknik Mesin, May, 1–9. https://doi.org/10.35439/mecha.v2i1.5

Winarno, G. (2020). Fisika Radiodiagnostik: Vol. I (I). Kementerian Kesehatan Republik Indonesia.